POWERREPD•MCLOCKCQ-DP133UDISPTRACKTUNELOUDMUTE78 910 1112 SCAN12 346APMBANDSRC5VOLUMEPUSHSELDISP1 2 3 4BAND65POWERREPD•MCLOCKCQ-DP133UDISPTRACKTUNELOUDMUTE78 910 1112 SCAN12 346APMBANDSRC5VOLUMEPUSHSELTUNED•MTRACKBANDSRCCQ-DP133U/DP103U/DPX153UENGLISH413Caution: To ensure safety, never attempt to preset sta-tions while you are driving.Manual Preset Memory Use manual or seek tuning to find a station.(➡ page 12) Press and hold one of the preset buttons from[1] to [6] until the display blinks once.BandPress [BAND] to select a desired band.(➡ page 12)qAuto Preset Memory (APM)wPreset Station CallingPress the corresponding preset button from[1] to [6] to tune in a preset station.Press and hold [BAND] (APM: auto preset memory) for more than 2 seconds.• The 6 stations with good reception will be automatically saved in the memory under preset buttonsfrom [1] to [6].• Once set, the preset stations are sequentially scanned for 5 seconds each.Preset buttons from [1] to [6]ENGLISH312RadioCQ-DP133U/DP103U/DPX153UManual Tuning[l TUNE]: Higher frequency[k TUNE]: Lower frequencyRadio CD player(When a CD is inserted.)Seek TuningPress and hold ...[l TUNE]: Higher frequency[k TUNE]: Lower frequencyTuning will automatically stop when the signals of the nextbroadcast station are received.BandPress [BAND] to change the band.Direct Memory(D·M)Your favorite FM/AM radio station can be memorized in the [D·M] button and you can call back radio stations just bypressing the button whatever the current sound source is, even if the power is off.Press [D·M]. (Press again to cancel)¡The direct memoried station is received.Default : FM 87.9 MHze Release [D·M] button . Then, frequency display willblink and new station will be overwritten on existingsaved station. Press and hold [D·M] until D·M indicator blinks.blinks Select the station in Radio mode (a above)Recalling the Direct Memory MemorizeD-MRadio ModePress [SRC] (source) to changeto the radio mode. Up to 6 stations each can be saved in the FM1,FM2, FM3 and AM preset station memories.Preset Station SettingNote: Existing saved stations are overwritten withnew stations after following this procedure.Display ChangePress [DISP] (display) to switch to the clock display.Frequency Clock displayD-MD-MFM Stereo indicatorblinks once