ENGLISH42CQ-DVR909U 61Anti-Theft SystemAnti-Theft SystemRemove the removableface plate.1≥ When the removable face plate comes off, thecenter speaker opens. (The center speakerstays open.)2 Remove the removable face plate by pulling onthe right side of the unit.3 Gently press the button of the case and open thecover. Place the face plate into the case and takeit with you when you leave the car.Security IndicatorThe security indecator blinks when the removableface plate is removed from the unit. (➡ page 49)1 Press and hold [SEL] for more than 2 seconds tochange to function control mode.2 Press [SEL] to select “S-LED SEL”.3 Press [$] [%] to turn the security indicator (S-LED) on.Install Removable Face Plate1 Slide the left side of the removable face plate inplace.2 Press the right end of removable face plate untila “click” is heard.CEIVER&ACTIVE DISPLAYOPENTILTBANDSOURCEAPMPOWERREMOTE2312; Removable FacePlate Case≥ Do not touch the contacts on the face plate or on the main unit, since this may result in poor electricalcontacts.≥ If dirt or other foreign substances get on the contacts, wipe them off with a clean and dry cloth.≥ Do not apply a strong downward force onto the face plate and do not put anything on it while it is open, orit might be damaged.≥ This face plate is not water-proof. Do not expose it to water or excessive moisture.≥ Do not remove the face plate while driving your car.≥ Do not place the face plate on the dashboard or nearby areas where the temperature rises to high levels.CautionsSecurity IndicatorThis unit is equipped with a removable face plate. Removing this face plate makes the radio totally inoperable.The security indicator will blink.