Panasonic CQ-FX721N Operating Instructions Manual

Also see for CQ-FX721N: Operating instructions

Panasonic CQ-FX721N Operating Instructions Manual Manual pdf 17 page image

17CQ-FX721N14ENGLISHCassette Tape Mode Settingq Press [MENU] / [SEL] during cassette playing.w Press [P·SET}] or [P·SET{] / [}] or [{] to select an item.e Press [BAND] to switch on or off in turn.Tape ProgramSearch (TPS)Play SettingsNotes:¡If no keys have been pressed for more than 15 seconds, the display returns to the previous one after changing to themenu display.¡Press [DISP] to return to the regular mode.SelectTPS: Activate the Tape Program Search mode.* Operation after this are the same as the opera-tions described above.: CancelOFFONRepeat Play SelectREP: Repeat the current selection.: CancelOFFONBlank Skip SelectB•SKIP: Skip unrecorded portions longer than 15 secondson the tape: CancelOFFONMetal TapeModeSelectMTL: When playing metal or chromium dioxide (CrO 2 )tapes.: Cancel - When playing normal tapeOFFONDolby B NoiseReductionSelectDOLBY: Set the Dolby B NR mode.: CancelOFFONCassette Menu DisplayTape Program Search (TPS)q Press [P·SET{] / [{] to activate the Tape ProgramSearch mode.w To select a desired program, press [2] or [1] cor-responding times to go forward (up to 9) or backward(up to 8).e Press [P·SET{] / [{] again to cancel.Blank Skip¡Press and hold [P·SET{] / [{] for more than 2 sec-onds to skip unrecorded portions longer than 15 sec-onds on the tape.¡Press and hold [P·SET{] / [{] again to cancel.Note: The blank skip does not work when an unrecordedportion of a tape is less than 15 seconds.Notes:The TPS mode may not work correctly in the following cases. This, however, does not mean that the unit is defective.¡There is an interval less than 3 seconds or having a high level of noise or hum between programs.¡There is particularly low-level passage during the program.