Panasonic CQ-RG131W Operating Instructions Manual

Contents

Panasonic CQ-RG131W Operating Instructions Manual Manual pdf 19 page image

CQ-RG131W19ENGLISH16Speaker ConnectionsCautions:1. Use ungrounded speakers only.2. The speakers to be used with this unit should be able to handle more than 40 W of audiopower. If an optional amplifier is used, the speakers should be able to handle the maximumoutput power of the amplifier. Use of speakers with small input ratings can cause damage tothe speakers.3. The speaker impedance should be 4 - 8 ohms. If the impedance is too large or too small, itaffects the output and may cause damage to the speakers or this unit.4. Do not use 3-wire type speaker system having a common earth lead. Never connect thespeaker cord to the body of the car. This unit uses the BTCL circuit, so each speaker shouldbe connected separately using parallel vinyl insulated cords.5. The speaker cords and the power amplifier unit should be kept away (about 30 cm apart) fromthe antenna and antenna extension cord.6. Follow the connection diagram below carefully. Failure to do so may cause damage to both unitand speakers. Unit will be damaged if speakers (Front, Rear) are not connected properly. Do not connect more than one speaker to one set of speaker leads._+_+L_+_+RRIGHT(White)(Whitew/Black Stripe)(Grayw/Black Stripe)(Gray)_+_+L_+_+RWRONG ChassisChassis_+_+L_+_+RWRONG_+_+L_+_+RRIGHT(White)(Whitew/Black Stripe)(Grayw/Black Stripe)(Gray)_+_+L_+_+R_+_+WRONG