Panasonic CQ-RX100U Operating Instructions Manual

Also see for CQ-RX100L: Installation instructions Operating instructions Operating instructions Service manual Service manual

Contents

Panasonic CQ-RX100U Operating Instructions Manual Manual pdf 14 page image

- 14 -General[VOL] (Volume)[SRC] (Source)selects a source.[PWR] (Power)toggles power on/off.Power On/OffSet your car’s ignition switch to the ACC or ON position.Power on: Press [SRC] (PWR).Power off: Hold down [SRC] (PWR) for morethan 1 second.Remote Control Sensor[SQ] (Sound Quality)selects a sound type (SQ).AUX1 Connector (3.5 mm stereo)From line output of external sound/audio device (ex. Silicon-audio player, HDD player, etc.)Caution• Set the volume level to low enough before the AUXconnection is completed.Failure to observe this, the loud noise may come out anddamage your speakers and your hearing.Volume Adjustment(Setting Range: 0 to 40, Default: 18)Turn [VOL].Press [SRC] to change the source.\CQ-RX400U\Radio Disc PlayerSystem-upConnector AUX 1* USB Connector(«Below) («Right)Note: Select USB Connector mode to operate the iPodseries connected with USB connector. (« System UpgradeGuidebook)(«Continued below)Source SelectionQUSB Connector\CQ-RX400U\When an optional USB memory is connected:When loading MP3/WMA/AAC dataWhen an optional USB memory is not connected: