- 17 -You have 6 preset modes (FLAT, ROCK, POP, VOCAL, JAZZ,CLUB). You can customize your settings for these and savethem for instant recall.SQ ChangeoverPress [SQ] to activate the SQ selection mode.Press [SQ] to select the sound type as follows.Press [DISP] to return to the regular mode.Notes:• After pressing [SQ] on the main unit, you can also select asound type by pressing the preset buttons [1] to [6].• Please refer to “Audio Settings” for the adjustment to eachspeaker.SQ Selection Based on GenreSQ (Sound Quality)SQ AdjustmentYou can adjust the characteristics of the currently selectedsound type (SQ). (« Above)It is also possible to preset up to 5 different adjusted SQs.SQ3 (3-Band Sound Quality)Center frequency and level are adjustable in each of 3 bands.This lets you fine-tune sound quality for each genre to suitcar-interior acoustics and your personal preferences.Tone/SQ adjustable range: B12 dB to A12 dB (by 2 dB)SQ Low/Bass: ±12 dB (at 60 Hz, 80 Hz, 100 Hz, 200 Hz)SQ Mid: ±12 dB (at 500 Hz, 1 kHz, 2 kHz, 3 kHz)SQ High/Treble: ±12 dB (at 10 kHz, 12 kHz, 15 kHz, 18 kHz)• The bass/treble control level of each frequency is fixed to thefrequency that has been selected for SQ.To return an adjusted SQ to the default settingPress [SQ], and select the SQ which is to be returned tothe default setting. (Only for main unit)Hold down [BAND] for 2 sec. or more.Notes:• You cannot save any SQ presetting value in [1] button.• Any SQ adjustments will not change the call up screennames such as ROCK and JAZZ.• Do not activate SQ and Bass/Treble at the same time to avoidcausing sound distortion.Sound Control(FLAT) flat frequency response:does not emphasize any part. (Default)(ROCK) speedy and heavy sound:exaggerates bass and treble.(POP) wide-ranged and deep sound:slightly emphasizes bass and treble.(VOCAL) clear sound:emphasizes middle tone and slightly emphasizes treble.(JAZZ) jazz-specifi c deep sound:sound with emphasis on sharpness of high-hat and echosaxophone.(CLUB) club and disco-specific sound:reproduction of realism being in a club.1 Press [VOL] (PUSH SEL:Select) to open the audio menu.2 Press [VOL] (PUSH SEL: Select) to selectSQ SET.3 Adjust each band./: center frequency up/down[] []: Band selection[] []: Level up/downLevelFrequency4 Hold down the numeric button [2] to [6] for2 sec. or more.• The adjusted SQ is preset in the number of the selectedbutton, and return to the regular mode resumes.• When you suspend the SQ preset adjustment, each levelremains your recent adjustment until a new SQ presettingoperation is performed or you call up the SQ preset.