Panasonic CQ-RX400N System Upgrade Manualbook

Also see for CQ-RX200N: Operating instructions Installation instructions

Contents

Panasonic CQ-RX400N System Upgrade Manualbook Manual pdf 9 page image

CQ-RX400N/CQ-RX300N/CQ-RX200N16 CQ-RX400N/CQ-RX300N/CQ-RX200N 17Pairing (Linking Devices) (continued)Bluetooth (continued)1 Press [SRC] to select the Bluetoothmode.2 Press [] to select the Bluetooth HFmode.lights.Notes:• Devices cannot be paired with this unit if anotherBluetooth device is already connected to it.If a Bluetooth device is connected to this unit whenpairing is started, the connection is automaticallydeleted and pairing begins.• The PIN code may be referred to as a “Passcode”,“Passkey”, “PIN”, or other term, depending on thedevice.• Depending upon devices to be paired, it may benecessary to conduct hands-free pairing in fi rst.• Once hands-free pairing has been completed with thisunit via operation from the cellular phone itself, it isautomatically disconnected and a Bluetooth connectionis initiated from this unit. Accordingly, “Disconnected”may appear on the cellular phone screen, but ifyou wait, the cellular phone will be automaticallyreconnected.• “TIME OUT” is displayed and the previous state isrestored if 2 minutes elapse in the pairing setup modewithout detecting a Bluetooth device.Pairing Bluetooth Hands-Free DeviceOperate the Bluetooth device to pair it with this unit.Operation will differ according to the device; the following is just a representative example.For details, see the instruction manual of the device being used.Select “Menu > Settings > Connectivity > Bluetooth > Search for audio enhanc.” from the cellular phone (BluetoothHands-Free Device).The cellular phone (Bluetooth Hands-Free device) searches for other nearby devices.Select “Panasonic BT200” from the search results screen.Input the PIN code for this unit.The default PIN code for this unit is “0000”.When “Do you want to connect to the detected device?” appears on the cellular phone screen (Bluetooth Hands-Free Device), select [Yes].“PAIRED” is displayed on this unit.Once paired with this unit, connect the cellular phone to the unit. ( page 20)Changing the PIN Code for this UnitBefore changing the PIN code for this unit:• Separate 4-digit PIN codes can be set for BluetoothAudio and Hands-Free devices.• The default PIN code for both the Bluetooth Audio andHands-Free modes is “0000”.• PIN codes cannot be changed if this unit is paired with adevice. First, delete the paired device. ( page 18, 21)• The Bluetooth device with over 5-digit PIN code is notoperated with this unit.1 Set the mode of the device whose PINcode you want to change.Bluetooth Hands-Free or Bluetooth Audio mode2 Hold down [VOL] (PUSHSEL: Select) for 2 sec. ormore to open the menu.3 Press [VOL] (PUSH SEL:Select) to select PIN CODE.4 Press [] and [] to change thefl ashing digit in “0000”.[]: Move the fl ashing digit to the left.[]: Move the fl ashing digit to the right.5 Press [BAND].The new PIN code is registered.When changing from an alreadypaired device but not connecting:3 Hold down [SEL] for2 sec. or more.The name of the already paireddevice is displayed, followed by“CONNECT”.4 Press [SEL].5 Press [BAND].(Blinks.)When pairing for the fi rst time:3 Hold down [SEL] for2 sec. or more.Pairing setup mode4 Press [BAND].(Blinks.)When changing from an alreadypaired device and connecting:The name of the device is displayed.3 Hold down [SEL] for2 sec. or more.The name of the already paireddevice is displayed, followed by“DISCONN.”.4 Press [SEL].5 Press [BAND].(Blinks.)Pairing (Linking Devices)(continued)EnglishEnglish