Panasonic CQ-RX400U System Upgrade Manualbook

Also see for CQRX400U - AUTO RADIO/CD/MP3 DECK: Operating instructions Installation instructions Operating instructions Operating instructions Service manual

Contents

Panasonic CQ-RX400U System Upgrade Manualbook Manual pdf 17 page image

CQ-RX400U/CQ-RX200U32 CQ-RX400U/CQ-RX200U 33Display Possible cause  Possible solutionThe disc is dirty or upside down. Check the disc.(After 5 seconds)The next disc automaticallyThe disc has scratches. Eject the magazine.• Check the disc.• Load the disc again.No operation by some cause. Eject the magazine. If failure persists, press the reset switch on the CDchanger. If normal operation is not restored, consult your dealer or thenearest Panasonic Servicenter to ask for repairs.No disc is in the CD Changer (magazine). Insert discs into the CD changer (magazine).The changer has become disconnected from the unit in the changer mode. Verify the wiring.Note: Messages in the action and display sections of the error chart vary with changer. Refer to the operatinginstructions for the CD changer for details.XM Satellite Radio ControlProblem Possible cause  Possible solutionChannel unselectableNo contact with XM Satellite Radio Inc. Refer to page 14 of this book and the XM’s website to sign up for XM Radioservice.Display Possible cause  Possible solutionCannot receive XM Satellite Radio. Verify the wiring.XM antenna unconnected. Connect the XM antenna.XM broadcasts unreceivable because of poor receiving conditions. Move to an area where XM broadcasts can be received well.Channel not in service. This channel is not currently in service. Tune to another channel.iPod ControlDisplay Possible cause  Possible solutionThe iPod was not recognized correctly. It could take some time for the iPod to be recognized. Check the connection. Reset the iPod, then connect it again.Your iPod has no playable music. Download playable music to your iPod.Troubleshooting (continued)Display Possible cause  Possible solutionA USB device that exceeds the current capacity that can be supplied wasconnected.For some reason, an over-current was detected. Use a USB memory that has a consumption current of less than 500 mA. Switch the Source, and select USB (MP3/WMA/AAC) mode again. Check that the USB connector section is not dirty, and that there is noforeign material.No operation by some cause. Switch the power or ACC ON/OFF. If this does not solve the problem, unplugthe power cord and plug it in again. In case the unit is still out of order,consult your dealer. ( Installation Instructions)(After 5 seconds)To next fi le automaticallyThe player for some reason cannot read the fi le you are trying to play. (Filerecorded in an unsupported fi le system, compression scheme, data format, fi lename extension, damaged data, etc.) Confi rm that the USB extension cable is fi rmly connected, and reconnect ifnot. Select a fi le that the player can read. Check the type of data stored inthe USB memory. Format the USB memory if necessary.(After 5 seconds)To next fi le automaticallyA WMA/AAC fi le can be copyrighted. The fi le protected by copyright is not playable.CD Changer ControlUSB (MP3/WMA/AAC) (continued)EnglishEnglish