1112 CQ-VD6505WEnglish Touch Panel Operation OverviewThe State of Operation Screen❒ Notes on the Touch PanelBefore operation¡Clean the surface of the touch panel. (a page 47)Operation¡Use only your fingers to operate the touch panel.¡Do not press the panel forcefully.¡Do not scratch the panel with fingernails or anyhard objects.¡Do not use a pen or other sharp implements tooperate the touch panel.¡Do not bump the front panel.a Failure to observe the above may damage orbreak the glass on the surface of the touchpanel.ProhibitionInput is not possible because the user hasattempted to perform an operation whichis not supported by the disc contents.Displays the Source Selection Screen.Source Button Menu ButtonExample: DVD modeDisplays the Menu Screen.Display Button(a next page)VolumeindicatorCurrentmodeDisc indicator(Lights when a disc is loaded)Clock time (a page 30)Note:¡The following picture is partly darkened for explanation.¡Displaying contents and their positions partly vary with each mode. Refer to the description of each mode for details.(Content varies with eachsource)Source Selection Screen appears.Touch desired source button.Touch to quit.Note:¡The screen above appears when no externaldevice is connected to AV1, AV2, and theExpansion Module (CY-EM100N, option).Source Selection Screen Menu ScreenMenu Screen appears. Select desired setting.Menu Setting, (a page 28)Press [SRC] to change todesired mode.Press [MENU] to let menuscreen appear.