Panasonic CQ-VW100N Operating Instructions Manual

Also see for CQ-VW100N: Installation instructions

Panasonic CQ-VW100N Operating Instructions Manual Manual pdf 42 page image

4142 CQ-VW100NEnglish Troubleshooting (continued)■ RadioPoor reception or noiseAntenna installation or wiring of antenna cable is faulty.aCheck whether the antenna mounting position and its wiring are correct. Inaddition, check to see whether the antenna ground is securely connected tothe chassis.No power is supplied to the antenna amplifier (when using a film antenna, etc.).aCheck the wiring of the antenna power lead.The number of autopreset stations is lessthan 6.The number of receivable stations is less than 6.aMove to an area where receivable stations number is maximum, and try pre-setting.Preset stations cannotbe stored.The contact of the battery lead is poor, or the battery lead is not always powered.aMake sure that the battery lead is connected securely, and preset stationsagain.The picture is dark. Thepicture is whitish. Somethingis wrong with the picture.The picture is light in colour.The screen is not adjusted properly.aMake every adjustment of the screen.■ Display Settings■ Common (continued)FM Stereo broadcast isreceived only in mono.The MONO mode is active.aCancel the MONO mode.Only strong signalstations can bereceived.The LOCAL mode is active.aCancel the LOCAL mode.The speaker channelsare reversed betweenright and left.The speaker wiring is reversed between right and left.aPerform the speaker wiring in accordance with the wiring diagram.The power of the unitfails unintentionally.The safety device works.aConsult your dealer, or your nearest Panasonic Service Centre.