Panasonic CQ-VW100U Operating Instructions Manual

Also see for CQVW100U - Car Audio - In-Dash DVD Receiver: Service manual Manual de instrucciones

Panasonic CQ-VW100U Operating Instructions Manual Manual pdf 47 page image

46 English47CQ-VW100USpecificationsGeneral¡Power supply : 12 V DC (11 V – 16 V), testvoltage 14.4 V, negativeground¡Current consumption : Less than 10 A (during discplayback)¡Maximum power output : 50 W x 4 ch¡Power output : 20 W x 4 ch¡Compatible speakerimpedance : 4 Ω¡Video input signal : Composite video signal, 1.0Vp-p (75 Ω)¡Audio input sensitivity : 2 Vrms¡Video output signal : Composite video signal, 1.0Vp-p (75 Ω)¡Pre-Amp output voltage : 2 Vrms¡Pre-Amp output impedance : Less than 600 Ω¡Dimensions (W x H x D) : 178 x 100 x 160 mm{7” x 3 15/16 ” x 6 5/16”}¡Weight : 2.3 kg {5 lbs. 1 oz.}FM stereo radio¡Frequency range : 87.9 MHz – 107.9 MHz¡Usable sensitivity : 12.2 dBf¡Stereo separation : 30 dB (1 kHz)¡S/N ratio : 62 dBAM radio¡Frequency range : 530 kHz – 1 710 kHz¡Usable sensitivity : 28 dB/μV¡Image rejection ratio : 50 dBAudio section¡Output voltage/Impedance : 2 Vrms/600 Ω¡Frequencycharacteristics : 20 Hz – 20 kHz (±1 dB)¡Dynamic range : 96 dB (during CD playback)¡S/N ratio : 95 dB (during CD playback)Monitor¡Liquid crystal panel : 7” wide¡Screen dimensions(W x H x D) : 154 x 87 x 177 mm{6 1/16 ” x 3 7/16 ” x 6 15/16”}¡Number of pixels : 336 960 pixels (234 verticalx 480 horizontal x 3)¡Valid pixel ratio : Over 99.99%¡Display method : Transparent color filter for-mat¡Drive method : TFT (Thin Film Transistor)active matrix formatNote:¡Specifications and the design are subject to modification without notice due to improvements in technology.¡Some figures and illustrations on this manual may be different from your product.Above Specifications comply with EIA standards.Power Output:20 W RMS x 4 Channels at 4 Ω and ≤1% THD+NSignal to Noise Ratio:80 dBA (reference: 1 W into 4 Ω)

/ 48

Related manuals for Panasonic CQVW100U - Car Audio - In-Dash DVD Receiver