Panasonic CQ-VW120W Operating Instructions Manual

Also see for CQ-VW120W: Installation instructions

Panasonic CQ-VW120W Operating Instructions Manual Manual pdf 35 page image

3435CQ-VW120WEnglishOtherOther settings: sets to ON if your car has ACC position.: sets to OFF if your car has no ACC posi-tion.default:Note:¡For an ACC-equipped car, select ON. The followingfunctions are available.¡The power is turned on automatically when insertinga disc.¡ selection disables turning on the power of themain unit through the remote control.: Blue-based screen: Green-based screen: Red-based screendefault: BlueRedGreenBlue(OSD color setting)OSD ColorOffOnOffOn(Setting ACC selection ON andOFF)ACC SelectCaution¡Be sure to select off when your car has no ACCposition in the ignition switch. Failure to do thiscould cause the battery to go dead.Memory ClearMemory clearanceThe state of all of the current memories are returned todefault settings.Note:¡The ID code is not deleted by executing memory clear.: clears the memory to default settings: no memory clear.The display returns to the previous one.appears whenis selected.: proceed.: no memory clear.CancelOKYesReally?NoYesCaution¡Be aware that this setting restores the unit to defaultsettings, so that all the memories and settings thatyou have set will be eliminated.: Select one between RGB1 and RGB2with which images are displayed mostregularly when a car navigation systemis connected via RGB connector.default: RGB1RGB1/2(RGB input selection)RGB InputNote:The power of this unit is turned off automatically afteris selected. (Memory clearance completed).Please turn on the power again to using this unit.OK