Panasonic CQ-VX2200W Operating Instructions Manual

Panasonic CQ-VX2200W Operating Instructions Manual Manual pdf 39 page image

45CQ-VX2200W1ENGLISH36SpecificationsGeneralPower Supply : 12 V DC (11 V - 16 V), test voltage 14.4 V, negative groundCurrent Consumption : Less than 8.5 A (CD play mode)Rated Output : 16 W x 4 ch (1 kHz, 1%, 4 Ω)Maximum Power Output : 41 W x 4 chSuitable Speaker Impedance : 4 ΩAudio Input Impedance : 10 kΩ (AUX IN)Audio Input Voltage : 2 V (AUX IN)Pre-out Output Voltage : 2 VPre-out Output Impedance : 600 ΩDimensions (W x H x D) : 178 x 100 x 160 mmWeight : 2.4 kgDSPNumber of Channels : 2 input channels, 4 output channelsSpace mode : 7 modeEqualizer Center Frequency : 80, 160, 320, 640, 1.6 k, 4 k, 10 k (Hz)Variable Range of Equalizer : –12 to +12 dB (13 steps)FM Stereo RadioFrequency Range : 87.5 - 108 MHzUsable Sensitivity : 12 dBf.Total harmonic distortion (mono) : 0.3 % (1 kHz)Weighted S/N ratio (mono) : 60 dBFrequency Response : 20 Hz – 15 kHz (± 3 dB)Stereo Separation : 42 dB (at 1 kHz)Image response ratio : 75 dBAM RadioFrequency Range : 531 kHz - 1,602 kHzUsable Sensitivity : 27 dB/μVImage response ratio : 65 dBCD PlayerChannel : 2 channelsQuantization : 16-bit linerFrequency Response : 5 Hz - 20 kHzDynamic range : 90 dB (IHF, A)Wow and Flutter : Below measurable limitsCassette Tape PlayerReproduction system : 4-track, 2-program stereoTape Speed : 4.76 cm/secFast Forward Time : 100 sec (C-60)Rewind Time : 100 sec (C-60)Wow and Flutter : 0.07 % (WRMS)Signal/Noise Ratio : Dolby B NR OFF 56 dB (IHF, A)Dolby B NR ON 66 dB (IHF, A)Frequency Response : 30 to 18,000 Hz (normal tape)30 to 20,000 Hz (metal tape)Note : Specifications and the design are subject to modification without notice due to improvements in technology.Dolby noise reduction manufactured under license from Dolby Laboratories Licensing Corporation.“DOLBY” and the double-D symbol B are trademarks of Dolby Laboratories Licensing Corporation.

/ 40

Related manuals for Panasonic CQ-VX2200W