Cooling or Soft Dry OperationPurpose is to obtain a comfortable room temperature whilesleeping. When you press the SLEEP Mode, the followingmovement will start to avoid overcooling.• Sleep shift operation starts, when the room temperaturereaches the setting temperature or after 1 hour of operation.• The setting temperature will be risen by 0.5°C at the start ofoperation and by 0.5°C one hour later.• The airflow volume will automatically change to Low fanspeed.• Sleep Mode operation time is 8 hours, the operation will bestop after 8 hours.• When used together with the Timer, the Timer has priority.8.5. Sleep Mode Auto Operation8.6. Powerful Mode Operation• Purpose of this operation is to obtain the setting temperature quickly.• When the Powerful Mode is set, the set temperature will be automatically decreased 3°C against the present settingtemperature (Lower temperature: 16°C).• This operation automatically will be running under SHi Fan Speed (Cooling), SLo Fan Speed (Soft Dry).• Vertical Airflow Direction:-- In “Manual” setting, the vane will automatically swing down 10° lower than previous setting.- In “Auto” setting, the vane will automatically swing up and down. However the lower limit will be shifted 10° downward.• Powerful Mode will operate for 15 minutes only, after that it will shift back to previous operation mode.• Powerful Mode will stop if:-- Powerful mode button is pressed again.- Stopped by ON / OFF switch.- Timer OFF activates.- Economy mode button is pressed.- Sleep mode is pressed.- Operation mode button is changed.8.7. Economy Mode Operation• Purpose of this operation is to save or reduced electrical power consumption of the room air conditioner.• When the Economy Mode is set, the set temperature will be automatically increased 0.5°C against the preset settingtemperature (Higher temperature: 30°C).• This operation automatically will be running under SLo Fan Speed.• Vertical Airflow Direction:-In “Manual” or “Auto” setting, the vane will automatically change to Auto Air Swing.• Economy Mode will stop if:-- Economy Mode button is pressed again.- Stopped by ON / OFF switch.- Timer OFF activates.- Powerful mode button is pressed.- Auto or Manual air swing button is pressed.- Fan Speed control button is pressed.- Sleep Mode button is pressed ON.- Operation Mode is changed.24CS-C18BKP CU-C18BKP5 / CS-C18BKP CU-C18BKP6 / CS-C24BKP CU-C24BKP5 / CS-C24BKP CU-C24BKP6