3712.10 Timer Control12.10.1 ON Timer• When the ON Timer is set by using the remote control, the unit will start to operate slightly before the set time, sothat the room will reach nearly to the set temperature by the set time.• For Cooling and Soft Dry operation, the operation will start 15 minutes before the set time.• For Automatic operation, the indoor fan will operate at SLo speed for 20 seconds, 15 minutes before the set timeto detect the intake air temperature to determine the operation mode. The power LED will blink.12.10.2 OFF Timer• When the OFF Timer is set using the remote control, the unit will stop operate according to the desired setting.Notes:1 By pressing ON/OFF operation button, the ON Timer or OFF Timer will not be cancel.2 To cancel the previous timer setting, press CANCEL button.3 To activate the previous timer setting, press SET button.4 If main power supply is switched off, the Timer setting will be cancel.12.11 Random Auto Restart Control• If there is a power failure during operation, the air conditioner will automatically restart after 3 to 4 minutes whenthe power is resumed.• It will start with previous operation mode and airflow direction.• If there are more than one air conditioner unit in operation and power failure occur, restart time for each unit tooperate will be decided randomly using 4 parameters:- intake air temperature, fan speed and air swing louverposition.• This Random Auto Restart Control is not available when Timer is set.12.12 Remote Control Signal Receiving Sound• Short beep sound will be heard when turn ON the air conditioner or enabling other operations.• Long beep sound will be heard when turn OFF the air conditioner or disabling other operations.