Panasonic CS-C24BKP Operating Instructions Manual

Also see for CSC18BKP - SPLIT A/C SYSTEM: Operating instructions Operating instructions Installation guide Service manual Operating instructions

Contents

Panasonic CS-C24BKP Operating Instructions Manual Manual pdf 6 page image

5PREPARATION BEFORE OPERATION Indoor Unit1 Connect the power supply cord to an independentpower supply2 Open the front panel3 Remove the air filters4 Fit the air purifying filters in place5 Insert the air filters6 Close the front panel Remote Control– To set the current time1 Press 1.2 Then press 2 to increase or decrease the time.3 Press 1 again.Set time at display will light up.CHECKAUTOAUTO HEAT DRY FANCOOLFANAUTORESET CLOCKFAN SPEEDAIR SWINGOFF CANCELON SET1 2 3TIMER1262 1453HOW TO OPERATE To start the operation• Press 1.• POWER indicator (green) on the indoor unit will lightup.• To stop, press once more. Setting Mode• Press 2 to select:-AUTO – Automatic OperationCOOL – Cooling OperationDRY – Soft Dry OperationFAN – Air Circulation OperationOFFONHEAT DRY FANCOOLCHECKTEMPAUTOAUTUTOFANANAUTUTOAUTUTORESET CLOCKAIR SWINGOFFCANCEL123TIMEROFF/ONPOWERFULECONOMYSLEEPONSETFAN SPEEDMODE235 164 Setting Temperature• Press 3 to increase or decrease the temperature.• The temperature can be set between 60°F ~ 86°F.• Recommended temperature:• During AUTO Operation, press 3 to select:-• Operation with 4°F higher than the standardtemperature.• Operation with the standard temperature.• Operation with 4°F lower than the standardtemperature. Standard Temperature• Once the Automatic Operation is selected, theindoor temperature sensor operates automaticallyto select the desired operation mode with Coolingor Soft Dry.• After the operation mode has been selected, themode does not change.OperationCoolingSoft DryStandardtemperature77°F72°FIndoortemperature73°FCOOLDRY75°F ~ 78°F2°F ~ 4°FLower than theroom temperature