4ENGLISHCHECKTEMPAUTAUTOONOFFAUTAUTO HEAHEAT DRDRY FANANCCOOLCOOLFANANAUTAUTORESET CLOCKMODE POWERFULECONOMYFAN SPEEDAIR SWINGOFF CANCELON SET1 2 3TIMEROFF/ONQUIETAUTO MANUAL#!$%^$*&35879064(21NAME OF EACH PART Remote Control Remote Control Signal• Make sure it is not obstructed.• Maximum distance : 10 m (32.8 ft).• Signal received sound.One short beep or one long beep. Notes for Remote Control• Do not throw or drop.• Do not get it wet.• Certain types of fluorescent lamps may affectsignal reception. Consult your dealer. How to Insert the Batteries1 Slide down the remote control cover completely2 Insert the batteries– Be sure the polarities are correct– 12:00 on display - flashing• Set the current time (CLOCK) immediately toprevent battery exhaustion. About the batteries• Can be used for approximately one year. Observe the following when replacing thebatteries :• Replace with new batteries of the same type.• Do not use rechargeable batteries (Ni-Cd).• Remove the batteries if the unit is not going to beused for a long period of time.1 Signal Transmitter2 Operation Display3 Quiet Mode Operation Button4 Room Temperature Setting Button(Illuminating button)5 Operation Mode Selection Button6 Economy Mode Operation Button7 Auto Airflow Direction Button8 ON-Timer Button9 OFF-Timer Button0 Reset Point(Press with fine-tipped object to clear the memory)! OFF/ON Button(Illuminating button)@ Powerful Mode Operation Button# Fan Speed Selection Button$ Manual Airflow Direction Button% Timer Set Button^ Timer Cancellation Button& Time-Setting Button* Clock Button( Remote Control CoverCHECKAUTOOFAUTO HEAT DRY FANCOOLFANAUTOAUTORESET CLOCKAIR SWINGOFFCANCEL123TIMERPOWERFULAUTO MANUALECONOMYSLEONSETFAN SPEEDMODE211.5V1.5V