Panasonic CS-CZ9SKE Service Manual

Also see for CS-CZ12SKE: Operating instructions

Contents

674 REMOTE CONTROL RECEIVING SOUND OFF/ON MODEThe Remote Control Receiving Sound OFF/ON Mode will be activated if the Auto OFF/ON button is pressedcontinuously for more than 16 seconds (4 “beep” sounds will occur at 16th seconds to identify the RemoteControl Receiving Sound Off/On Mode is in standby condition) and press “AC Reset” button at remotecontrol.Press “Auto OFF/ON button” to toggle remote control receiving sound.o Short “beep”: Turn OFF remote control receiving sound.o Long “beep”: Turn ON remote control receiving sound.After Auto OFF/ON Button is pressed, the 20 seconds counter for Remote Control Receiving Sound OFF/ONMode is restarted.16.2 Remote Control Button16.2.1 SET Button To check remote control transmission code and store the transmission code to EEPROM:o Press “Set” button by using pointer.o Press “Timer Set” button until a “beep” sound is heard as confirmation of transmission code changed. To limit set temperature range for COOL & DRY, HEAT mode.o Press “Set” button by using pointer.o Press TEMP increment or decrement button to choose No. 3.o Press Timer increment or decrement button to select desired temperature low limit of set temperature forCOOL & DRY mode.o Press Timer Set button to confirm low limit selection.o Press TEMP increment or decrement button to choose No. 4.o Press Timer decrement or increment button to select desired temperature high limit of set temperature forCOOL & DRY mode.o Press Timer Set button to confirm high limit selection.o Press TEMP increment or decrement button to choose No. 5.o Press Timer increment or decrement button to select desired temperature low limit of set temperature forHEAT mode.o Press Timer Set button to confirm low limit selection.o Press TEMP increment or decrement button to choose No. 6.o Press Timer decrement or increment button to select desired temperature high limit of set temperature forHEAT mode.o Press Timer Set button to confirm high limit selection.o LCD returns to original display if remote control does not operate for 30 seconds or press Timer Cancelbutton.