Panasonic CS-D34DTQ Service Manual

Also see for CS-D34DTQ: Operating instructions

Contents

Panasonic CS-D34DTQ Service Manual Manual pdf 30 page image

308.8. Wireless Remote Control (Optional part)Name and function of each partNOTES• Ensure that the correct button is pressed as simultaneous pressing of the multiple buttons will not make the setting correct.• The illustration above is for explanatory purpose only. The appearance will be different during actual operation.• If using the wireless remote control in conjunction with the wired remote control, the settings made from the wireless remote con-trol will appear on the wired remote control display (except when making timer settings).• Buttons marked with * are not needed for normal operation. If one of these buttons is pressed by mistake, press the same buttononce more to cancel the operation.• When the power resumed after power failure, the unit will restart automatically with all previous settings preserved by the mem-ory function. (Auto restart function)TransmitterTransmits the remote control signal.Airflow direction setting displayFan speed displayTemperature setting display (16°C - 31°C)Time/time setting displayShows the timer operation setting time or the current time.Address number displayOperation selection displayOFF/ON buttonUsed to start and stop the operation.ODOUR WASH buttonFILTER RESET buttonPress to cancel the “FILTER” indicator light on the control panel.FAN SPEED buttonUsed to select the fan speed of high (HI), medium (MED), low(LO) or auto (AUTO).SET button*Local setting function.ADDRESS SET button*Used to change the address setting when using more than oneindoor unit.RESET buttonPressing this button will clear all the settings from memory.You will then need to make the settings again.TIMER/CLOCK SET buttonsUsed to set the timer operation and the current time.AIR SWING (AUTO/MANUAL) buttonsUsed to determine the air swing condition, either auto or manual.MODE buttonUsed to select the operation of AUTO, FAN, COOL or DRY.TEMP (UP/DOWN) buttonsUsed to select the desired temperature.ECONOMY operation button