Panasonic CS-E10JD3EA Operating Instructions Manual

Also see for CS-E10JD3EA: Service manual Service manual Operating instructions Service manual

Contents

Panasonic CS-E10JD3EA Operating Instructions Manual Manual pdf 8 page image

8OFF / ONTEMPTIMER/CLOCKMODEQUIET/POWERFULFAN SPEEDMODECHECK RESETAIR SWINGOFF/ONCANCELCLOCKSETSELECTUPDOWNAC RCTIMER/CLOCKFAMODEAIOFF/ONCANCELCLOCKSETSELECTUPDOWNWeekly Timer DisplayLights up if Timeroperation is selected6 different programs canbe set in a day (1 ~ 6)Time to be selected(10 minutes step)ON Timer. To automatically switch “ON” the unit.OFF Timer. To automaticallyswitch “OFF” the unit.Day to be selectedIndicates the selected dayWEEKLY TIMER SETTINGWEEKLY TIMER SETTINGDay and Timer Set Up Method1. Press Timer MODEfor 4 seconds to change displayto weekly timer.2. Press Timer UPor DOWNto select your desired day.3. Press SELECTto confirm your selection.4. “1” will be blinking, press SELECTto set program 1.5. Press Timer OFF/ONto select ON or OFF timer.6. Press Timer UPor DOWNto select your desired time.If you want to set the timer together with yourdesired temperature, press TEMP to select thetemperature.7. Press SETto confirm program 1. The selected daywill be highlighted with .• After 2 seconds, the display will move to the nextprogram. Repeat steps 4 to 7 to set programs 2 to 6.• During timer setup, if no button is pressed within 30seconds, or if the SETbutton is pressed, the setting atthat moment is confirmed and timer setup is ended.OPERATION DETAILSOPERATION DETAILSDisable & Enable Weekly Timer• To disable weekly timer setting, press MODE, then pressCANCEL.• To enable previous weekly timer setting, press MODE,then press SET.Indicates the next timeroperation day• Daily timer and weekly timer could not be set at thesame time.• Promotes energy saving by allowing you to set up to 6programs in any given day.• Same timer program cannot be set in the same day.Check Current Timer ProgramPerform the step below to check the timer program for aparticular day.1. Press Timer MODEto enter timer mode.2. Press SELECTto enter day setting.3. Press Timer UPor DOWNuntil your desired day is shown,press SELECTto confirm your selection.4. Press Timer UPor DOWNto check the set programs.Modify Current Timer Program or Add NewTimer Program1. Press Timer MODEto enter timer mode.2. Press SELECTto enter day setting.3. Press Timer UPor DOWNuntil your desired day is shown.4. Perform steps 4 to 7 of “Day and Timer Set UpMethod” to modify existing timer program, or add anytimer program.Cancel Current Timer ProgramPerform the step below to cancel the timer program for aparticular day.1. Press SELECTto enter day.2. Press Timer UPor DOWNuntil your desired day is shown.3. Press SELECTto enter program setting.4. Press Timer UPor DOWNuntil your desired day is shown.Press CANCELto cancel the program, will disappear.