ENGLISHHOW TO OPERATEAuto, Heat, Cool, Dr y■ Operation DetailsAUTO - Automatic Operation• The unit will automatically selectthe operation mode accordingto the setting, outdoor and roomtemperature. During operation modeselection, power indicator blinks.For every 30 minutes, the operationmode is reselected.!54/(%!4#//,$292 /&& /&&4)-%2 /.4)-%2&!.30%%$1Start theoperation.HEAT - Heating Operation• Enables you to enjoy the warmingeffect at your preferred settingtemperature.• For cold air prevention, air mightnot blow out immediately and powerindicator blinks when operation starts.• Also operates in defrost mode(maximum 12 minutes) where by thepower indicator blinks. The meltedfrost is drained at outdoor unit andindoor fan is stopped.COOL - Cooling OperationSelect thedesiredMODE OFF/ON FAN SPEED • Enables you to enjoy the coolingeffect at your preferred settingtemperature.operation.!54/$29 (%!4#//,POWERFULQUIETTIMERONAUTOAIR SWINGMANUALSETDRY - Soft Dry Operation• Enables you to set the desiredtemperature at low fan speed whichprovides you with dehumidifyingsurroundings.1 2 3OFFCHECKCANCELCLOCK RESETINVERTER3Set thetemperature.(16°C ~ 30°C)● Powerful and Quiet operations can be activated in alloperation modes.● Press OFF/ONbutton again to stop the operation.Hints● To save electricity, close the curtains when using air conditioner to prevent sunlight and heat from coming in.● Heat is obtain from outdoor air to warm up the room. Use an additional heater when the outdoor ambient temperature is low.Troubleshooting● The room has a peculiar odour. This may be a damp smell emitted by the wall, carpet, furniture orclothing in the room.● Air conditioner does not cool or heat efficiently. Ensure the temperature has been set correctly.Ensure windows and doors have been closed properly.Ensure filters are cleaned or replaced when necessary.Ensure inlet and outlet vents of the units have not been obstructed.5