ENGLISH5AUTOHEATFANSPEEDAIRSWINGCOOLDRYTEMPAIR SWINGFAN SPEEDQUIETPOWERFULTIMERON1 2 3OFFSETCANCELMODE OFF/ONAC RCSET CLOCKCHECK RESET■ Hint• A temperature setting 1°C higherin cooling operation or 2°C lower inheating operation than the desiredtemperature equates to a 10%power saving.AUTO, HEAT, COOL, DRY● Supersonic air purifying device operates automatically oncethe unit is switched on.● POWERFULand QUIEToperations are available in all modes.● Press OFF/ONagain to stop the operation.OFF/ONStart theoperation.22MODESelect thedesiredoperation.114%-0Set thetemperature.(16°C~30°C)33Troubleshooting● Mist emerges from indoor unit. ► Condensation effect due to cooling process.● Heating/Cooling operation does not work. ► Ensure temperature is set correctly.► Make sure windows and doors are closed.► Make sure filters are cleaned and replaced.► Make sure inlet and outlet vents are cleared.● Water flowing sound during operations. ► Cause by refrigerant flow inside the unit.● The power indicator blinks during the operation andthe indoor fan is stopped.► The unit is in defrost mode, and the melted frost is drained from theoutdoor unit.■ Operation DetailsCOOL - Cooling Operation• Enjoy cool air at your desiredtemperature.DRY - Soft Dry Operation• Keeps your environmentdehumidified by running a verygentle cooling operation.• During soft dry operation, theindoor fan operates at low fanspeed.AUTO - Automatic Operation• Unit selects the operation modeaccording to temperature setting,outdoor and room temperature.• The power indicator blinks duringoperation.• Operation mode is reselectedevery 30 minutes.• In heating mode, it takes a whilefor the unit to warm up. Thepower indicator blinks during thisoperation.HEAT - Heating Operation