ENGLISH7E18JKK, E22JKK7 TO ENJOY QUIET OPERATION• This operation reduces airflow noise.8 TO REACH TEMPERATUREQUICKLY• Single Split System: This operation stops automaticallyafter 20 minutes.• Multi Split System: Press the button again or turn OFF theunit to stop this operation.9 Press and hold for 5 seconds to dim or restore theunit’s indicator brightness.10 Press and hold for approximately 10 seconds toshow temperature setting in °C or °F11 Press and hold for approximately 5 seconds to show12-hour (am/pm) or 24-hour time indication.12 Press to restore the remote control’s default setting.13 Not used in normal operations.NOTESNOTESQUIET,POWERFUL• Can be activated in all modes and can be cancelled bypressing the respective button again.QUIET,POWERFUL• Cannot be selected at the same time.TO SET THE TIMERTO SET THE TIMER• To turn ON or OFF the unit at a preset time.ONOFF1 2 SETSelect ON orOFF timer Set the time Confirm• To cancel ON or OFF timer, pressONor OFF thenpress CANCEL.• When ON Timer is set, the unit may start earlier (upto 35 minutes) before the actual set time in order toachieve the desired temperature on time.• Timer operation is based on the clock set in theremote control and repeats daily once set. For clocksetting, please refer to Remote Control Preparation atback cover.• If timer is cancelled manually or due to power failure,you can restore the previous setting (once power isresumed) by pressing SET.FAN SPEEDMODEQUIETTEMPOFF/ONAIR SWINGPOWERFULTIMERSETCANCELONOFF1 2 3SET CHECK CLOCK RESEAC RC6