Panasonic CS-E18RKUAW Operating Instructions Manual

Also see for CS-E18RKUAW: Service manual Service manual Installation manual Installation manual

Contents

Panasonic CS-E18RKUAW Operating Instructions Manual Manual pdf 8 page image

8To learn more...Operation modeAUTO : During operation mode selection the POWER indicator blinks.Single • Unit selects operation mode every 10 minutes according to setting temperature and room temperature.Multi • Unit selects operation mode every 3 hours according to setting temperature, outdoor temperature and roomtemperature.HEAT : Unit takes a while to warm up. The POWER indicator blinks during this operation.COOL : Provides efficient comfort cooling to suit your needs.DRY : Unit operates at low fan speed to give a gentle cooling operation.FAN : To circulate air in the room.ECONAVI and AUTO COMFORTECONAVI AUTOCOMFORTor NoteAIR SWING When manual AIR SWING is selected,the ECONAVI and AUTO COMFORToperations will be cancelled.The unit will start to initialize(for approximately 1 minute)The human activity sensorwill start to detect.Human activity sensor operationLow activity Normal activityHumanModeSettemperatureHigh activity AbsentECONAVI ; Detecting human presence and activity, the unit controls room temperature to save energy.Low activity Normal activityHumanModeSettemperatureHigh activity AbsentSetFan SpeedAUTO COMFORT ; Detecting human presence and activity, the unit controls room temperature to keep humancomfortable consistently.HEATCOOL/DRYHEATCOOL/DRY* During low activity, fan speed 1 tap up for first 15 minutes or until set temperature is reached.** During human absence, maximum fan speed for COOL/DRY mode is medium fan.+1 tap 0HGLXP)DQ+1 tap*+2°F / +1°C+2°F / +1°C+0.5°F / +0.3°C-2°F / -1°C-4°F / -2°C+4°F /+2°C-4°F /-2°C-4°F / -2°C+4°F /+2°C-4°F /-2°CThe human activity sensor will also scan for area of heat source and movement in a room.Detection area• Based on area activeness horizontal airflow direction will adjust either fixat predetermined position or swing left/right periodically.• The human activity sensor performance is influenced by indoor unitlocation, movement speed, temperature range, etc.90º23ft/7m• The human activity sensor may:- mistakenly detect an object with heat source & movement similar to human, such as pets, etc.- mistakenly detect as non-heat source & movement if a human stays motionless for certain period of time.• Do not place large objects near the sensor and keep away heating units or humidifier from the sensor’s detectionarea. They may cause sensor malfunction.Single Single split systemMulti Multi split system