Panasonic CS-E24EKRS Operating Instructions Manual

Contents

5ENGLISH■ Operation DetailsAUTO, HEAT, COOL, DRYCOOL - Cooling Operation• Enjoy cool air at your desiredtemperature.DRY - Soft Dry Operation• Keeps your environmentdehumidified by running a verygentle cooling operation.• During soft dry operation, theindoor fan operates at low fanspeed.AUTO - Automatic Operation• Unit selects the operation modeaccording to temperature setting,outdoor and room temperature.• The power indicator blinks duringoperation.• Operation mode is reselectedevery 30 minutes.• In heating mode, it takes a whilefor the unit to warm up. Thepower indicator blinks during thisoperation.HEAT - Heating OperationSelect thedesiredoperation.Set thetemperature.(16°C~30°C)Start theoperation.TroubleshootingFANSPEEDAIRSWINGAUTOHEATCOOLDRYIONOFF/ONTEMPMODEQUIETAIR SWINGTIMERON SETOFF CANCELAC RCRESETSET CHECK CLOCKINVERTER1 32POWERFUL FAN SPEEDion223311■ Hint• A temperature setting 1°C higherin cooling operation or 2°C lower inheating operation than the desiredtemperature equates to a 10%power saving.● Mist emerges from indoor unit. ► Condensation effect due to cooling process.● Heating/Cooling operation does not work. ► Ensure temperature is set correctly.► Make sure windows and doors are closed.► Make sure filters are cleaned and replaced.► Make sure inlet and outlet vents are cleared.● Water flowing sound during operations. ► Cause by refrigerant flow inside the unit.● The power indicator blinks during the operation andthe indoor fan is stopped.► The unit is in defrost mode, and the melted frost is drained from theoutdoor unit.● Supersonic air purifying device (super alleru-buster) operatesautomatically once the unit is switched on.● , and operations are available in all modes.● Press again to stop the operation.