Panasonic CS-E24JKES Operating Instructions Manual

Contents

5 ENGLISHTO SELECT FAN SPEED(5 OPTIONS)• For AUTO, the indoor fan speed is automaticallyadjusted according to the operation mode.TO ADJUST AIRFLOW DIRECTION(5 OPTIONS)• Keeps the room ventilated.• If AUTO is set, the louvers swing left/right andup/down automatically.• In heat mode, the air blows horizontally for a while,then starts to blow downwards and the airflow louversstart to swing left/right after the temperature rises.TO ENJOY CLEAN &FRESH AIR• Generates negative ions to produce fresh air effectand attract dust which will then be captured at thepositively charged e-ion filters.TO MONITOR AIR QUALITY• Patrol sensor detects air quality.• When the air quality is unsatisfactory, e-ion operationwill start automatically.TO IMPROVE HUMIDITYAND MOISTURE LEVEL• This operation reduces air dryness and provides youwith a comfortable living environment.• When vertical airflow direction is set to AUTO, it stopsat lower position to avoid cold air contact. However,you can adjust the louver direction manually.TO ENJOY QUIETENVIRONMENT• This operation reduces airflow noise.TO ACHIEVETEMPERATURE QUICKLY• , , and can be activatedin all modes and can be cancelled by pressing therespective button again.• only can be activated in COOL mode and canbe cancelled by pressing the button again.• and or , and cannot be selected at the same time.• and can be activated even when theunit is turned off. In this condition, fan speed and airswing can not be adjusted.OPTIONAL SETTINGSOPTIONAL SETTINGSPatrol starts automatically with the unitswitched on with .Press and hold for 5 seconds, then releaseto disable or restore this setting.Press and hold for 5 seconds to dim orrestore the unit’s indicator brightness.Press and hold for approximately 10seconds to show temperature setting in °Cor °F.Press and hold for approximately 5 secondsto show 12-hour (am/pm) or 24-hour timeindication.Press to restore the remote control’s defaultsetting., Not used in normal operations.Use curtains to screen off sunlight and outdoor heat toreduce power consumption during cool mode.TO SET THE TIMERTO SET THE TIMER• To turn ON or OFF the unit at a preset time.Select ON orOFF timer.Set the time. Confirm.• To cancel ON or OFF timer, press or thenpress .• When ON Timer is set, the unit may start earlier (upto 30 minutes) before the actual set time in order toachieve the desired temperature on time.• Timer operation is based on the clock set in the remotecontrol and repeats daily once set. For clock setting,please refer to Remote Control Preparation at backcover.• If timer is cancelled manually or due to power failure,you can restore the previous setting (once power isresumed) by pressing .

/ 8

Related manuals for Panasonic CS-E24JKES