Panasonic CS-E7NKDW Service Manual

Also see for CS-E12NKDW: Operating instructions

Contents

Panasonic CS-E7NKDW Service Manual Manual pdf 44 page image

4411.2.4 Connect the Cable to the Indoor Unit1 The inside and outside connection cable canbe connected without removing the front grille.2 Connection cable between indoor unit andoutdoor unit shall be approvedpolychloroprene sheathed 4 x 1.5 mm 2 flexiblecord, type designation 245 IEC 57 or heaviercord.3 Bind all the indoor and outdoor connectioncable with tape and route the connectioncable via the escapement.4 Remove the tapes and connect theconnection cable between indoor unit andoutdoor unit according to the diagram below.o Secure the connecting cable onto the control board with the holder.o Ensure the colour of wires of outdoor unit and the terminal Nos. are the same to the indoor’srespectively.o Earth wire shall be Yellow/Green (Y/G) in colour and longer than other AC wires for safety reason.