8To learn more... Single Single split systemMulti Multi split systemOperation modei AUTO-X: The fast cooling is ideal when you come home on a hot day.AUTO: During operation mode selection the POWER indicator blinks.Single • Unit selects operation mode every 10 minutes according to setting temperature and room temperature.Multi • Unit selects operation mode every 3 hours according to setting temperature, outdoor temperature and roomtemperature.HEAT : Unit takes a while to warm up. The POWER indicator blinks during this operation.COOL: Provides efficient comfort cooling to suit your needs.DRY : Unit operates at low fan speed to give a gentle cooling operation.nanoe-G in-fi lter deactivationDepending on the unit’s accumulated operation time, nanoe-G in-filter deactivation may activate only once a day afterthe unit turned off.To remove the moisture left in the internal parts, the fan will operate for 30 minutes with flap opened slightly. Thisprocess only applicable when the unit is operated in COOL/DRY mode before turned off.Then, nanoe-G deactivatesviruses/bacteria on the filter for 2 hours with fan stopped and flap closed.Do not turn off the power supply during this operation. After power failure, this operation will not resume.ECONAVI and AUTO COMFORTECONAVI AUTOCOMFORTor NoteAIR SWING When manual AIR SWING is selected,the ECONAVI and AUTO COMFORToperations will be cancelled.The unit will start to initialise(for approximately 1 minute)The human activity sensorand the sunlight sensor willstart to detect.Human activity sensor operationLow activity Normal activityHumanModeSettemperatureHigh activity AbsentECONAVI ; Detecting human presence and activity, the unit controls room temperature to save energy.Low activity Normal activityHumanModeSettemperatureHigh activity AbsentSetFan SpeedAUTO COMFORT ; Detecting human presence and activity, the unit controls room temperature to keep humanECONAVI and AUTO COMFORT take advantage ofthe human nature that human being takes time to feelthe temperature rise during low activity level; the unitadjusts temperature to maximise energy savingwithout sacrificing the comfort.comfortable consistently.HEATCOOL/DRYHEATCOOL/DRY* During low activity, fan speed 1 tap up for first 15 minutes or until set temperature is reached.** During human absence, maximum fan speed for COOL/DRY mode is medium fan.-2 °C-2 °C+1 °C+2 °C-1 °CLow activityHumanModePrecise control of temperature during low activity to maximise energy saving.SettemperatureCOOL/DRYECONAVI and AUTO COMFORT+1 tap 0HGLXP)DQ+1 tap*-2 °C+0.3 °C-2 °C+2 °C+1 °C