Panasonic CS-E9TKA Operating Instructions Manual

Contents

Panasonic CS-E9TKA Operating Instructions Manual Manual pdf 7 page image

7 EnglishSee "To learn more..." for details.How to useTo purify the airnanoe-G• nanoe-G starts automatically when the unit isturned on with OFF/ON.• Can be activated even when the unit is turnedoff. In this condition, the unit will operate as a fanwith AUTO fan speed and flap swing.To deactivate viruses/bacteria on the fi lternanoe-G POWER• After the unit is turned off, the nanoe-G in-filterdeactivation may activate up to 150 minutes.Turning on the unit cancels this operation.FAN SPEED To select fan speed(Remote control display)AUTOFAN• For AUTO, the indoor fan speed is automaticallyadjusted according to the operation mode.AIR SWING To adjust airfl ow direction(Remote control display)• Keeps the room ventilated.• In COOL/DRY mode, if AUTO is set, the flapswings left/right and up/down automatically.• In HEAT mode, if AUTO is set, the horizontalflap is fixed at the predetermined position.The vertical flap swings left/right after thetemperature rises.• Do not adjust the flap by hand.Note, , SLEEP ,• Can be activated in all modes and can becancelled by pressing the respective buttonagain.,• Cannot be selected at the same time.Auto Restart Control• If power is resumed after a power failure, theoperation will restart automatically after a periodof time with previous operation mode and airflowdirection.• This control is not applicable when TIMER is set.To set the timer2 sets of ON and OFF timers are availableto turn ON or OFF the unit at different presettimes.TIMERON SETCANCELOFF CANCEL1 2 31 Select ON or OFFtimerExample:OFF at 22:00• Each time pressed: OFFCancel2 Set the time3 Confirm SETTIMER• To cancel ON or OFF timer, press ON orOFF to select respective or then pressCANCEL .• If timer is cancelled manually or due to powerfailure, you can restore the timer again bypressing ON or OFF to select respectiveor then press SET .• The nearest timer setting will be displayed andwill activate in sequence.• When ON Timer is set, the unit may startearlier (up to 15 minutes) before the actualset time in order to achieve the desiredtemperature on time.• Timer operation is based on the clock set inthe remote control and repeats daily once set.For clock setting, please refer to Quick guide.