Panasonic CS-MC12DKU Operating Instructions Manual

Contents

ENGLISH3�� ECONOMY• To operate the unit if the remotecontrol is misplaced or malfunctioning.Action OperationmodePress once AutomaticOperationPress until “beep”soundCoolingOperation• To turn OFF, press the Auto OFF/ONbutton again.• To switch the remote control signalreceiving sound off or on.1. Press until you hear a “beep” soundand release.2. Press again until you hear a “beep-beep” sound and release.3. Press to switch the sound off or on.(Long “beep” - OFF; short “beep”- ON)OPENRemote Control Preparation1. Pull out2. Insert batteries(AAA or R03)3. Press CLOCK button4. Setcurrenttime• Timer operation will be based on currenttime set.• The batteries can be used forapproximately 1 year.• The batteries must be recycled ordisposed of properly.Note: The illustrations in this manual are for explanation purposes only and may differ from theactual unit. It is subject to change without notice for future improvement.PRODUCT OVERVIEWOutdoor UnitAir inlet (rear)Air outlet• Make sure it is not obstructed.• Maximum distances : 32.8 ft (10 m).• Certain fluorescent lights may interferewith signal transmission. Consult yourdealer.■ AboutRemote Control SignalRemote Control Auto OFF/ON Button5. Press again to confirmTroubleshooting● Operation delayed for a few minutes after restart. ➤ This is a normal self protection function.● Sound like water flowing during operation. ➤ Caused by refrigerant flow inside.● Mist emerges from indoor unit. ➤ Condensation effect due to cooling process.● Noisy during operations. ➤ Installation work could be slanted or front panel isn’t closed properly.● Remote control/display does not work. ➤ Check whether batteries are correctly inserted or need replacement.● The unit cannot operate. ➤ Check whether circuit breaker is tripped or timer is being used correctly.● Outdoor unit emits water/steam. ➤ Condensation or evaporation has occurred at piping surface.Air inlet (side)Air intakeAir filterFront panelIndoor UnitIndicatorAir Purifying filterAuto OFF/ONbuttonReceiverDischarged airLCD displayOff/OnFan speed selectionClock setting Memory resetTemperature settingEconomy operationOperation modeQuiet operationTimer settingPowerful operationAirflow directionadjustmentTransmitterAirflow directionlouver