Panasonic CS-RZ18RKR Operating Instructions Manual

Contents

Panasonic CS-RZ18RKR Operating Instructions Manual Manual pdf 7 page image

7 English How to useECONOMY To save electrical powerconsumptionECONOMY• Save power consumption at unoccupied room byadjust set temperature up to 3°C automatically.• Brightness of all indicators will be dimmed.AIR SWING To adjust airfl ow direction(Remote control display)• Keeps the room ventilated.• In COOL/DRY mode, if AUTO is set, the flaps swingsleft/right and up/down automatically.• In HEAT mode, if AUTO is set, the horizontal flap isfixed at the predetermined position. The vertical flapswings left/right after the temperature rises.• In i AUTO-X mode, if AUTO is set, the horizontal flapis fixed at the lower position and shift to the upperposition after reaches set temperature. The verticalflap movement will fixed at predetermined position.• If manual is set, the horizontal and vertical flap arefixed at the predetermined position.• Do not adjust the flap by hand.NoteQUIET , POWERFUL , ECONOMY• Can be activated in HEAT, COOL and DRYmode and can be cancelled by pressing therespective button again.i AUTO-X, QUIET , POWERFUL , ECONOMY• Cannot be selected at the same time.Auto Restart Control• If power is resumed after a power failure, theoperation will restart automatically after a periodof time with previous operation mode and airflowdirection.• This control is not applicable when TIMER is set.To set the timer2 sets of ON and OFF timers are availableto turn ON or OFF the unit at different presettimes.ONOFFSETCANCEL1 2 3TIMERCANCEL3TIMER1 2 31 Select ON or OFFtimerExample:OFF at 22:00• Each time pressed: OFFCancel2 Set the time23 Confi rm SETTIMER• To cancel ON or OFF timer, press ON or OFFto select respective or then press CANCEL .• If timer is cancelled manually or due to powerfailure, you can restore the timer again bypressing ON or OFF to select respective orthen press SET .• The nearest timer setting will be displayed andwill activate in sequence.• When ON Timer is set, the unit may startearlier (up to 35 minutes) before the actualset time in order to achieve the desiredtemperature on time.• Timer operation is based on the clock set inthe remote control and repeats daily once set.For clock setting, please refer to Quick guide.See "To learn more..." for details.