Panasonic CS-S18HKH Service Manual

Panasonic CS-S18HKH Service Manual Manual pdf 48 page image

48• During Remote Control Number Switch Mode, press any button at remote control to transmit and store the desired transmissioncode to the EEPROM.14.3. Remote Control Button14.3.1. SET BUTTON• To check remote control transmission code:- Press for more than 10 seconds by using pointer.• To change the air quality sensor sensitivity- Press and release with pointer.- Press the Timer Decrement button to select sensitivity:1. Low Sensitivity2. Standard (Default)3. Hi Sensitivity- Confirm setting by pressing Timer Set button, a “Beep” sound will be heard. LCD returns to original display after 2 seconds.- LCD returns to original display if remote control does not operate for 30 seconds.14.3.2. CLOCK BUTTON• To change the remote control’s time format- Press for more than 5 seconds.14.3.3. RESET (RC)• To clear and restore the remote control setting to factory default- Press once to clear the memory.14.3.4. RESET (AC)• To restore the unit’s setting to factory default- Press once to restore the unit’s setting.14.3.5. TIMER• To change indoor unit indicator’s LED intensity- Press continuously for 5 seconds.14.3.6. TIMER• To change remote control display from Degree Celsius (qC) to Degree Fahrenheit (qF).- Press continuously for 10 seconds.Remote Control Printed Circuit BoardJumper A (J-A) Jumper B (J-B) Remote Control No.Short Open A (Default)Open Open BShort Short COpen Short D