3CAUTIONCAUTIONINDOOR UNIT AND OUTDOOR UNITDo not wash the indoor unit with water, benzene,thinner or scouring powder.Do not use for other purpose such as preservationof food.Do not use any combustible equipment in front of theairflow outlet to avoid propagation fire.Do not expose yourself directly to cold air for a longperiod.Do not sit or step on the unit, you may falldown accidentally.Do not touch the sharp aluminium fi n,sharp parts may cause injury.Do not switch ON the indoor unit when waxing thefloor. After waxing, aerate the room properly beforeoperating the unit.Do not install the unit in oily and smoky areas.Ensure drainage pipe is connected properly.Otherwise, leakage may occur.Aerate the room regularly.After long period of use, make sure the installationrack is not deteriorate to prevent the unit from fallingdown.REMOTE CONTROLDo not use rechargeable (Ni-Cd) batteries.It may damage the remote control.Remove the batteries if the unit is not going to be usedfor a long period of time.New batteries of the same type must be insertedfollowing the polarity stated to prevent malfunction ofthe remote control.WARNINGWARNINGPOWER SUPPLYDo not use modified cord,joint cord, extension cord orunspecified cord to preventoverheating and fire.Do not share the same power outlet with otherequipment to prevent overheating and fire.Do not operate with wet hands to prevent electricshock.If the supply cord is damage, it must be replacedby the manufacturer, its service agent or similarlyqualified persons in order to avoid a hazard.It is strongly recommended to be installed with EarthLeakage Circuit Breaker (ELCB) or Residual CurrentDevice (RCD) to prevent electric shock or fire.This equipment must be earthed to prevent electricalshock or fire.Prevent electric shock by switching off the powersupply when:- Before cleaning or servicing.- Extended non-use.- Abnormally strong lightning activity.INFORMATIONFOR SEASONAL INSPECTION AFTER EXTENDED NON-USE• Checking of remote control batteries.• No obstruction at air inlet and air outlet vents.• Use Auto OFF/ON button to select Cooling operation. After 15 minutes ofoperation, it is normal to have the following temperature difference betweenair inlet and air outlet vents:Cooling: ≥ 8°CFOR EXTENDED NON-USE• Turn off the power supply.• Remove the remote control batteries.NON SERVICEABLE CRITERIASTURN OFF POWER SUPPLY then please consultauthorized dealer under the following conditions:• Abnormal noise during operation.• Water/foreign particles have entered the remotecontrol.• Water leaks from Indoor unit.• Circuit breaker switches off frequently.• Power cord becomes unnaturally warm.• Switches or buttons are not functioning properly.Stop using the product when anyabnormality/failure occurs and disconnectthe power plug or turn off the powerswitch and breaker.(Risk of smoke/fi re/electric shock)Examples ofExamples ofabnormality/abnormality/failurefailure• The ELCB trips frequently.• Burning smell is observed.• Abnormal noise or vibration of the unit isobserved.• Water leaks from the indoor unit.• Power cord or plug becomes abnormallyhot.• Fan speed cannot be controlled.• The unit stops running immediately even ifit is switched on for operation.• The fan does not stop even if the operationis stopped.Contact immediately your local dealer formaintenance/repair.