ENGLISH9POWERTIMERAUTO COMFORTNANOE-GPOWERFULQUIETINDOOR UNITCAUTION• Switch off the power supply and unplug before cleaning.• Do not touch the aluminium fin, sharp parts may cause injury.CLEANING INSTRUCTIONSCLEANING INSTRUCTIONS HINTHINT• Do not use benzene, thinner or scouring powder.• Use only soap ( pH7) or neutral household detergent.• Do not use water hotter than 40°C.• To ensure optimal performance of the unit, cleaningmaintenance has to be carried out at regular intervals.Dirty unit may cause malfunction and you may see errorcode “H99”. Please consult authorized dealer.5 HUMAN ACTIVITY SENSOR• Do not hit or violently press the sensor orpoke it with a sharp object. This can lead todamage and malfunction.• Do not place large objects near the sensorand keep away heating units or humidifiersfrom the sensor’s detection area. This maylead to sensor malfunction.2 8149567 3 10 nanoe-G GENERATOR• Do not touch during operation.1 INDOOR UNIT• Wipe the unit gently with a soft, dry cloth.2 FRONT PANELRemove Front Panel• Raise and pull to remove the front panel.• Wash gently and dry.Close Front Panel21 11 Press down both ends of the front panel to close it.2 Press at center of the front panel to close it securely.(CS-S18NKZW, CS-S24NKZW, CS-S28NKZ)3 SUNLIGHT SENSOR AND REMOTE CONTROLRECEIVER4 ALUMINIUM FIN5 HUMAN ACTIVITY SENSOR6 HORIZONTAL AIRFLOW DIRECTION LOUVER• Do not adjust by hand.7 VERTICAL AIRFLOW DIRECTION LOUVER• Do not adjust by hand.8 AUTO OFF/ON BUTTON• Use when remote control is misplaced or a malfunctionoccurs.Action ModePress once. AutoPress and hold until 1 beep isheard, then release. CoolingPress the button to turn off.9 AIR FILTERS• Air filter cleaning is required every two weeks.• Wash/rinse the filters gently with water to avoid damageto the filter surface.• Dry the filters thoroughly under shade, away from fire ordirect sunlight.• Replace any damaged filters.10 nanoe-G GENERATORClean with dry cotton bud.• nanoe-G generator cleaning isrecommended every 6 months.