212.3. Quiet operation (Cooling Mode/Cooling areaof Dry Mode)----------------------------------------------- 2712.4. Powerful Mode Operation ------------------------------ 2812.5. ON Timer Control ---------------------------------------- 2912.6. OFF Timer Control --------------------------------------- 2912.7. Auto Restart Control------------------------------------- 2912.8. Indication Panel------------------------------------------- 2912.9. Ionizer Operation ----------------------------------------- 3013 Protection Control ---------------------------------------------- 3213.1. Protection Control For All Operations--------------- 3213.2. Protection Control For Cooling & Soft DryOperation--------------------------------------------------- 3413.3. Protection Control For Heating Operation --------- 3514 Servicing Mode -------------------------------------------------- 3614.1. Auto OFF/ON Button ------------------------------------ 3614.2. Select Remote Control Transmission Code ------- 3614.3. Remote Control Button --------------------------------- 3715 Troubleshooting Guide --------------------------------------- 3815.1. Refrigeration Cycle System --------------------------- 3815.2. Breakdown Self Diagnosis Function ---------------- 4015.3. Error Codes Table --------------------------------------- 4116 Disassembly and Assembly Instructions -------------- 4216.1. Disassembly of Indoor Unit --------------------------- 4216.2. Outdoor Electronic Controller RemovalProcedure-------------------------------------------------- 4717 Technical Data --------------------------------------------------- 4817.1. Operation Characteristics ----------------------------- 4817.2. Sensible Capacity Chart ------------------------------- 5218 Exploded View and Replacement Parts List----------- 5318.1. Indoor Unit------------------------------------------------- 5318.2. Outdoor Unit ---------------------------------------------- 551 Safety Precautions• Read the following “SAFETY PRECAUTIONS” carefully before perform any servicing.• Electrical work must be installed or serviced by a licensed electrician. Be sure to use the correct rating of the power plug andmain circuit for the model installed.• The caution items stated here must be followed because these important contents are related to safety. The meaning of eachindication used is as below. Incorrect installation or servicing due to ignoring of the instruction will cause harm or damage, andthe seriousness is classified by the following indications.• The items to be followed are classified by the symbols:• Carry out test running to confirm that no abnormality occurs after the servicing. Then, explain to user the operation, care andmaintenance as stated in instructions. Please remind the customer to keep the operating instructions for future reference.This indication shows the possibility of causing death or serious injury.This indication shows the possibility of causing injury or damage to properties.This symbol denotes item that is PROHIBITTED from doing.1. Engage dealer or specialist for installation and servicing. If installation or servicing done by the user is defective, it will cause water leakage,electrical shock or fire.2. Install according to this installation instructions strictly. If installation is defective, it will cause water leakage, electric shock or fire.3. Use the attached accessories parts and specified parts for installation and servicing. Otherwise, it will cause the set to fall, water leakage, fireor electrical shock.4. Install at a strong and firm location which is able to withstand the set’s weight. If the strength is not enough or installation is not properly done,the set will drop and cause injury.5. For electrical work, follow the local national wiring standard, regulation and the installation instruction. An independent circuit and single outletmust be used. If electrical circuit capacity is not enough or defect found in electrical work, it will cause electrical shock or fire.6. This equipment is strongly recommended to install with Earth Leakage Circuit Breaker (ELCB) or Residual Current Device (RCD).Otherwise, it may cause electrical shock and fire in case equipment breakdown or insulation breakdown.7. Use the specified cable and connect tightly for indoor/outdoor connection. Connect tightly and clamp the cable so that no external force will beacted on the terminal. If connection or fixing is not perfect, it will cause heat-up or fire at the connection.8. Wire routing must be properly arranged so that control board cover is fixed properly. If control board cover is not fixed perfectly, it will causeheat-up or fire at the connection point of terminal, fire or electrical shock.9. When carrying out piping connection, take care not to let air substances other than the specified refrigerant go into refrigeration cycle.Otherwise, it will cause lower capacity, abnormal high pressure in the refrigeration cycle, explosive and injury.10. Do not install outdoor unit near handrail of veranda. When installing air-conditioner unit at veranda of high rise building, child may climb up tooutdoor unit and cross over the handrail and causing accident.