4113.2.4. Filter Cleaning Operation SettingChoose the operation setting by pressing AUTO OFF/ON button.• If there is no operation, or receives any remote control signal within 5 minutes, the setting mode quits.13.3. Individual Correspondence ModeSetting Operation1 • Filter cleaning will run automatically after the air conditioner operation stops (air conditioneris turned off using remote control).• After the filter cleaning is completed, the air conditioner operation will remain off.2** • Filter cleaning will run automatically before the air conditioner operation starts (air conditioneris either turned on using remote control or turned on by the air conditioner timer).• After the filter cleaning is completed, the air conditioner operation will start automatically.3** • Filter cleaning will run automatically before the air conditioner operation starts (air conditioneris turned on using remote control).• After the filter cleaning is completed, the air conditioner operation will start automatically.4 • Filter cleaning will run automatically after the air conditioner operation stops (air conditioneris either turned off using remote control or turned off by the air conditioner timer).• After the filter cleaning is completed, the air conditioner operation will remain off.** The setting is valid only if the following conditions are fulfilled:1. The air conditioner is turned off for at least 3 minutes.2. The air conditioner has operated continuously for at least 2 hours in previous operation.