Panasonic CS-XU10AKH Operating Instructions Manual

8Cleaning the Air ConditionerCleaning has to be carried out at regularintervals to ensure the unit is at optimalperformance. A dirty unit may causemalfunction and you may retrieve “H 99”error code. Consult an authorised dealer.• Before cleaning, switch off the power supply andunplug the unit.• Do not touch the aluminium fin as the sharp partsmay cause injury.• Do not use benzine, thinner or scouring powder.• Use soap ( pH 7) or neutral householddetergent only.• Do not use water hotter than 40 °C / 104 °F.Indoor unit( Structure of the unit may vary depending onthe model)Outdoor unitClean the debris that surround theunit.Clear any blockage from the drainpipe.nanoeTM-G GeneratorOnce every 2 weeks• Clean with dry cotton bud.• Do not touch during operation.Air fi ltersOnce every 2 weeks• Wash/rinse the filters gently withwater to avoid damaging thesurface.• Dry the filters thoroughly under a shade, awayfrom fire or direct sunlight.• Replace any damaged filters.Remove air fi lter Attach air filterRemove from the unit Insert into the unitAUTOOFF/ONAluminium finFront panelAir filters nanoe TM-G GeneratorIndoor unitDo handle the unit surface withcare to avoid scratches by sharpor rough items (e.g. fingernails,tools, rings, etc). Wipe the unitgently with a soft damp cloth.The coils and fans should be cleaned periodicallyby an authorised dealer.Front panelWash gently and dry.How to remove front panelAUTOOFF/ON2 Slide thefront panel toright A andpull out B .1 Raise up.BAClose it securelyAUTOOFF/ON2 Match andpush in.1 Hold horizontally.3 Close down.4 Press both ends and center of the front panel.