Panasonic CS-YC9MKV Service Manual

Panasonic CS-YC9MKV Service Manual Manual pdf 27 page image

279.4.3 Manual Fan Speed Controlz Manual fan speed can be set with Fan Speed selection button at the remote controlz There are 3 level of fan speed setting : Lo, Me, Hi9.5 Outdoor Fan Speed Controlz There is only one speed for outdoor fan motor.z When compressor stops, outdoor fan will continue running for 30 seconds.9.6 Vertical Airflow Direction Control.z The louver can be adjusted by pressing the button at remote control to the desired position.z When operation stops using remote control, the discharge vent is reset ,and stop at the closing position..Operation modeManual 18 ° 28 ° 37 ° 46 ° 55 °Cooling/ Soft Dry Auto 18° ~ 55 °Manual Depending on remote control settingDuring judgment Auto 18°9.7 Horizontal Airflow Direction Controlz Horizontal airflow direction louver can be adjusted manually by hand.9.8 Timer Controlz Timer can be set using remote control (12-hour timer setting). When Timer- ON is set for cooling and Soft Dryoperation, the unit with timer set will start operate earlier than the setting time. This is to provide a comfortableenvironment when reaching the set ON time.z For Cooling and Soft Dry operation, the operation will start 15 minutes before the set time.z For Automatic operation, the indoor fan will operate at Slo speed for 25 seconds, 30 minutes before the set timeto detect the intake air temperature to determine the operation mode. The power LED will blink during detection.z If main power supply is switched off or encounter power failure, timer setting will be cancel. Timer needs to bereset.z The ON timer or OFF timer will be cancel by pressing CANCEL button.z The ON timer or OFF timer will be cancel is ON/OFF operation button is pressed.z Each timer setting is effective only once.9.9 Random Auto Restart Controlz If there is a power failure during operation, the air conditioner will automatically restart after 3 minutes when thepower is resumed.z It will start with previous operation mode and airflow direction.z If timer is set, timer setting will be cancel. The timer needs to be reset after the power is resumed.