Panasonic CT-24SX11U Operating Instructions Manual

Also see for CT-24SX11: Operating instructions Operating instructions

Contents

INSTALLA TIONOptional Cable ConnectionsShielded audio and video cables should be used between components. For bestresults:[] Use 75-ohm coaxial shielded cables.13 Use appropriate input and output connectors, that match your component connectors.[] Avoid long cables to minimize interference.AC Power Supply CordCAUTION: TO PREVENT ELECTRIC SHOCK MATCH WIDEBLADE OF PLUG TO WIDE SLOT OF AC OUTLET AND FULLYINSERT. DO NOT USE A PLUG WITH A RECEPTACLE OR OTHEROUTLET UNLESS THE BLADE CAN BE FULLY INSERTED TOPREVENT BLADE EXPOSURE.Polarized plugPROTECT POWER CORDS FROM BEING WALKED ON, ROLLED OVER,CRIMPED, BENT OR PINCHED, PARTICULARLY AT PLUGS, CONVENIENCERECEPTACLES, AND THE POINT WHERE THEY EXIT FROM THE APPARATUS.Cable / Antenna ConnectionFor proper reception, either a cable or antenna connection is required.Cable ConnectionConnect the cable supplied by your local cable company.Incoming Cable fromCable CompanyNote: A cable converter box may be required for proper reception. L_,Check with your local cable company for compatibility _requirements.Antenna Connections[][]75 Ohm VHF/UHFon back of TVFor proper reception of VHF/UHF channels, an external antenna is required. For bestreception an outdoor antenna is recommended.Antenna Mode must be set to TV./-- Cable PresetCable Mode is preset at the factory. Antennausers must change to Antenna Mode in theSetup Menu.Incoming Cable fromHome Antenna[]