Panasonic CT-34WX53 Operating Instructions Manual

Contents

7Cable ConnectionConnecting the Aerial cable to the RF In TerminalDIGITALINS-VIDEOCOMPONENT VIDEO INPUTINPUTP BP RYVIDEOAUDIORLTO AUDIOAMPRL1 21 2 3VIDEOPROGOUTANT1ANT2SPLITOUTNotes:(1) To obtain optimum quality picture and sound, an Aerial, the correct cable (75 Ohm coaxial) and the correct terminatingplug are required.(2) If a communal Aerial system is used, you may require the correct connection cable and plug between the wall Aerialsocket and your television receiver.(3) Your local Television Service Centre or Dealer may be able to assist you in obtaining the correct Aerial system for yourparticular area and the accessories required.(4) Any matters regarding Aerial installation, upgrading of existing systems or accessories required, and the costs incurred,are the responsibility of you, the Customer.Note: Certain cable systems offset some channels toreduce interference or have Premium(scrambled) channels. A cable converter box isrequired for proper reception. Check with yourlocal Cable company for its compatibilityrequirements.Incoming Cable fromHome AntennaIncoming Cable fromCable Company75 Ohm VHF/UHFon back of TV• For proper reception of VHF/UHF channels, an external antenna is required. For best reception, an outdoor antenna isrecommended. Antenna Mode must be set to TV.• Incoming Cable from Home AntennaConnect home antenna to ANT1 connection on back of television. Select TV mode and ANT1 in the SET UP menu.( Cable Mode is preset at the factory. Antenna users must change to TV mode and select ANT1 in the Set Up Menu.)Antenna ConnectionVHF Aerial UHF AerialMixer75 OhmCoaxial CableS-VIDEO VIDEO L - AUDIO - RINPUT 4ACTION TV/VIDEO VOLUME HPJCHANNELConnect headphones / earphones as follows.You can listen to sound from the headphone Jack.(M3 plug)(Optional)Connecting Headphones / Earphones