Panasonic CT-36HX42 Operating Instructions Manual

Also see for CT-32HL42: Operating instructions Operating instructions Operating instruction

OPTIONAL EQUIPMENT CONNECTIONSOptional Equipment ConnectionsVCR ConnectionFollow this diagram when connecting your television to a VCR only.VCRI Incoming_t_rouT J_rrtN i Cable7 CONNECTIONS ON BACK OF THE TV.......... Use either the -F" 7 S-VLdeo or Videor_ Q Q I!!!._,o_:_::_AMP- -- -- JI- JCABLES NOT SUPPLIEDNote: The remote control must be programmed with supplied codes to operate the VCR.Viewing a television programProcedure1, Select ANT1 in the SET UP menu under Prog Chart (Program Channels).2. Tune the television to the television program you want to view.Viewing a videoProcedure£3 Option A1. Select ANT1 in the SET UP menu under Prog Chan.2. Press the W/VIDEO button on the remote control to select the video input (VIDEO 1, VIDEO 2 & COMP1, COMP2, etc.)connected to your VCR.3. Begin the video.£3 Option B1. Select ANT2 in the SET UP menu under Prog Chan.2. Tune the television to Channel 3 or 4, depending on your VCR.3. Begin the video.Recording a television programProcedureOption A (Recording and viewing the same program)1. Select ANT2 in the SET UP menu under Prog Chan.2. Tune the television to Channel 3 or 4, depending on your VCR.3, Using the VCR, tune to the television program you want to record.4. Begin recording.Option B (Recording one program while viewing another program)1. Select ANT1 in the SET UP menu under Prog Chan.2. Press the W/VIDEO button on the remote control to select the video input (VIDEO 1, VIDEO 2, etc,) connected to your VCR.3. Using the VCR, tune to the television program you want to record,4. Begin recording.5. Press the W/VIDEO button on the remote control to switch back to TV mode.6. Tune the television to the television program you want to view.6e