INSTALLATIONInstallationTelevision LocationThis unit is intended to be used with an optional stand or entertainment center. Consult yourdealer for available options.[] Avoid excessive sunlightor brightlights, includingreflections.£3 Keep away from excessive heat or moisture. Inadequate ventilation may cause internalcomponentfailure.£3 Fluorescent lightingmay reduce remote controltransmittingrange.£3 Avoid magneticequipment,includingmotors,fans, or externalspeakers.Optional Cable ConnectionsShielded audio and video cables should be used between components. For best results:O Use 75-ohm co_tal shielded cables.£3 Use appropdate input and outputconnectorsthat match your component connectors.[] Avoid long cables to minimize interference.AC Powe r Supply Cord .....CAUTION: TO PREVENTELECTRICSHOCK,MATCHWIDEBLADEOF PLUGTOWIDE,SLOTOF AC OUTLETANDFULLYINSERT.DO NOT USE A PLUGWITH ARECEPTACLE OR OTHER OUTLET UNLESS THE BLADE CAN BE FULLYINSERTEDTO PREVENTBLADEEXPOSURE. FOR SOME MODELSTHATARENON-POLARIZED,THE USEOF AN AC ADAPTORCONNECTORMAYBE NECESSARY.Polarized plugCable / AntennaFor proper reception, either a cable or antenna connection is required.Cable ConnectionConnect the cable suppliedby your local cable company.Note: A cable converter box may be required for proper reception.Check with your local cable company for compatibilityrequirements.Antenna ConnectionIncoming Cable fromCable Company75 Ohm VHF/UHFon back of TVFor proper receptionof VHF/UHF channels, an extemal antenna is required. Forbest receptionan outdoorantenna is recommended.Antenna Mode must be set to TV in the SETUP menu.-_, Cable PresetCable Mode is preset at the factory.Antenna users must change to AntennaMode in the Setup Menu.Incoming Cable fromHome Antenna[]