6CARE & CLEANINGCARE & CLEANINGe-ion FILTERSe-ion FILTERS• Clean the filters regularly.• Wash/rinse the filters gently with waterto avoid damage to the filter surface.• Dry the filters thoroughly underthe shade, away from fire or directsunlight.• Replace any damage filter.ACTIVE e-ion GENERATORACTIVE e-ion GENERATORFRONT PANELFRONT PANELRaise and pull to remove. Washgently and dry.RemoveRemoveWASHING INSTRUCTIONSWASHING INSTRUCTIONS• Do not use benzene, thinner or scouring powder.• Use only soap ( pH7) or neutral household detergent.• Do not use water hotter than 40°C.ACTIVE e-ion POWER MODULEACTIVE e-ion POWER MODULEClean with dry cotton bud.• Active e-ion generatorcleaning is recommendedevery 6 months.INDOOR UNITINDOOR UNITWipe the unit gently with a soft,dry cloth.HINTSHINTS• Clean the filter regularly for best performance and toreduce power consumption.• Please consult your nearest dealer for seasonalinspection.FOR SEASONAL INSPECTION AFTER EXTENDEDFOR SEASONAL INSPECTION AFTER EXTENDEDNON-USENON-USE• Checking of remote control batteries.• No obstruction at air inlet and air outlet vents.• After 15 minutes of operation, it is normal to have thefollowing temperature difference between air inlet and airoutlet vents:Cooling: ≥ 8°C Heating: ≥ 14°CNON SERVICEABLE CRITERIASNON SERVICEABLE CRITERIASTURN OFF POWER SUPPLY then CALL AuthorizedDistributor under the following conditions:• Abnormal noise during operation.• Water/foreign particles have entered the remote control.• Water leaks from Indoor unit.• Circuit breaker switches off frequently.• Power cord becomes unnaturally warm.• Switches or buttons are not functioning properly.FOR EXTENDED NON-USEFOR EXTENDED NON-USE• Activate heat mode for 2~3 hours to thoroughly dry the unit.• Turn off the power supply.• Remove the remote control batteries.ALUMINIUM FINALUMINIUM FINCAUTION• Switch off the power supply before cleaning.• Do not touch the aluminium fin, sharp part may cause injury.