Panasonic CW-XC63HU Installation And Operating Instructions Manual

Also see for CW-C83GU: Installation and operating instructions

Contents

13Features and InstallationUpper GuideWindow SashWindow sillFront AngleUpper guide 9Frame Curtain 1Foam-pe 10Foam-pe 13CabinetINDOOR OUTDOORINDOOR OUTDOORSash trackFront AngleCabinetAbout 12.7mm ( 1 /2 ")About 12.7mm ( 1 / 2 ")Sill Support 2Nut 4Bolt 3Frame Guide 11Screw (Type B) 6Screw (Type B) 6Sill support 2Sill support 2Screw (Type A) 51. Open the window. Mark a line oncenter of the window sill (or desiredair conditioner location).Carefully place the cabinet on thewindow sill and align the center markon the bottom front with the centerline marked in the window sill.2. Pull the bottom window sash downbehind the upper guide until it meets.NOTE:• Do not pull the window sash down sotightly that the movement of FrameCurtain is restricted.3. Loosely assemble the sill supportusing the parts in Fig. 3.4. Select the position that will place thesill support near the outer most pointon sill (See Fig. 4)NOTE: Be careful when you install thecabinet (frame guides arebroken easily).5. Attach the sill support to the cabinettrack hole in relation to the selectedposition using 2 Type A screws ineach support (See Fig. 4).6. The cabinet should be installed with avery slight tilt (about 12.7mm( 1/2 "))downward toward the outside (SeeFig. 5).Adjust the bolt and the nut of sillsupport for balancing the cabinet.7. Attach the cabinet to the window sillby driving the screws (Type B)through the front angle into windowsill.8. Pull each Frame curtain fully to eachwindow sash track, and repeat step 2.Cabinet InstallationFig. 1Fig. 2Fig. 3Fig. 4Fig. 5