No.❐ Installation hardware❐ OverviewThis product should be installed by a professional.However, if you plan to install this product yourself,your first step is to decide where to install it. Theinstructions in these pages will guide you throughthe remaining steps:(Please refer to the “WARNING” statement above.)≥ Identify and label the car wires.≥ Connect the car wires to the wires of the powerconnector.≥ Check the operation of the product.If you encounter problems, please consult yournearest professional installer.6DiagramItemENGLISH28Installation GuideCX-D3000U 3737Before you begin installation, look for the itemswhich are packed with your product.≥ Warranty Card…Fill this out promptly.≥ Panasonic Servicenter List for Service Directory…Keep for future reference in case the productneeds servicing.❐ Required toolsYou’ll need a screwdriver, and the following:Q’ty4WARNINGThe installation information is designed for experienced installers and is notintended for non-technical individuals. It does not contain warnings or cautions ofthe potential dangers involved in attempting to install this product.Any attempt to install this product in a motor car by anyone other than a qualifiedinstaller could cause damage to the electrical system and could result in seriouspersonal injury or death.12345Tapping screws(5 mm·k16 mm)Binding-Head Screws(M5k6 mm) 4211L-shaped bracketsPower connector(5 m)Clamp connector111Caution:≥ This product operates with a 12 V DC nega-tive ground auto battery system only. Do notattempt to use it in any other system. Doingso could cause serious damage.12 V DCtest bulbElectricaltapeSide-cutpliersCord clampRCA cord(3 m)7Double-sided tape8