Panasonic CY-VHD9401N Installation Instructions Manual

Also see for CY-VHD9401N: Installation instructions Operating instructions

Contents

Panasonic CY-VHD9401N Installation Instructions Manual Manual pdf 4 page image

34 CY-VHD9401N CY-VHD9401N 35Before InstallationDisplay Unit Lateral AngleAdjustmentYou can swivel it to the left and right, 30˚ each way.Hold the display unit by the non-slip part in theupper half of it and adjust its lateral angle.Open the Display Unit1 Push the display release button [PUSH OPEN]until the display is unlocked.(Press the button with one hand while holdingthe display with the other.)2 Open the display unit by both hands until acomfortable viewing angle is reached.Close the Display UnitMove the display unit by both hands until thedisplay release button is locked.Note:≥ Always use both hands to open or close thedisplay unit.≥ Always check that the display release button islocked after closing the display unit.≥ If the display unit cannot be locked, be sure toconsult your dealer and remedy the situation.[PUSH OPEN]Safety Installation Diagram≥ This unit opens and closes at the maximum dimensions given below.WARNING:Have a professional technician wire and install the product.Professional skill and experience is required to wire and install the product. Improper installation couldresult in failure of safety equipment resulting in accident and injury. For safety’s sake, always ask thestore from which you purchased the product to install and wire it for you.Approximately 150 mm*Approximately300 mmMaximum120˚Approximately 300 mm* Install the product in such a way as to maintainthe distances shown even when the display unitis rotated by 30˚ toward the front seat headrest(page 35).Installation angle: Less than 20˚Perform the adjustment below in order to provide the installation range shown in the figure on the left.Maximum120x30x30xENGLISH1ENGLISH2