Panasonic CY-VM7203N Operating Instructions Manual

Also see for CY-VM7203N: Brochure & specs

Contents

Panasonic CY-VM7203N Operating Instructions Manual Manual pdf 8 page image

14 EnglishCY-VM7203N 15 EnglishCY-VM7203NGeneral13 14PowerTurn your car’s ignition key to the ACC or ON position.ON: Press [SRC/PWR] on the display unit.Press [SRC] (PWR) on the remote control.OFF: Press and hold [SRC/PWR] again for more than 1seconds on the display unit.Press and hold [SRC] (PWR) again for more than 1seconds on the remote control.Note: You cannot turn on the power via the remote controlwhen “OFF” is selected in “ACC SELECT”. (page 24)Source (page 16)Press [SRC/PWR] to change the source.AVVIDEO 1VIDEO 2Note: Select the same source (AV/VIDEO 1/VIDEO 2) asthe terminal that is connected to the optional externaldevice (AV-IN/VIDEO 1-IN/VIDEO 2-IN).Volume[VOL ]: Increase[VOL ]: DecreaseSetting Range: 0 to 30Note: The sound level for each source is stored in memory. The volume setting must be balanced with theconnected device. Adjust volume from the device side. Use this unit at close to the default volume level, ratherthan at maximum or minimum volume.Display Open/CloseOPEN: Press [OPEN] (CLOSE).CLOSE: Press [OPEN] (CLOSE) again.Note: When the display unit is opened, “TILT” indicator lights. If the unit stops halfway, press [OPEN] (CLOSE) againand draw it all the way in. Opening/closing the display can also be done when thepower is off (ACC ON).Warning Do not touch the unit while the display is moving.Inserting hands, fi ngers or foreign objects into theunit can cause injuries and damage to the unit. Keep babies and children away from the unit.Display Position AdjustmentTilt Angle Adjustment (TILT) Adjustment is operated only be the remote control unit. Press and hold [TILT] on the display unit for morethan 2 seconds. Press [] or [] to adjust.The setup is the same as from MENU. (page 22)Folding Down the DisplayTemporarilyTip the monitor forward temporarily to operate theswitches and other controls on the back of the monitor.Fold Down: Press [TILT] on the display unit.Raise: Press [TILT] again on the display unit.Note: Even when the unit is power off, you can fold down thedisplay temporarily.Caution Avoid physical shock on the display. Do not place any object on the display unit, orsubject it to undue force. Do not move the display forcibly. The monitor movable range may be limited by a typeof car, a position where the display is mounted. etc.MuteMUTE ON: Press [MUTE].MUTE OFF: Press [MUTE] again.[SRC/PWR] (Source/Power) [OPEN] (CLOSE)[SRC] (PWR)(Source/Power)[VOL ] [VOL ][MUTE][TILT][] [][VOL ] [VOL ][MUTE] Notes: Adjust the angle from “Display Unit Adjustment(DISPLAY UNIT)” of “User Settings (USER)”. (page22) Vertical angle (TILT) is saved in the memory, so whenthe display unit is drawn out next, it is automatically setat the angle and in the position adjusted before. After adjusting its angle, also adjust the brightness aswell. (page 18) The car model and installation condition may imposesome restrictions on the adjustment of the monitor’sangle.15