Panasonic CZ-RTC6 Operating Instructions Manual

Also see for CZ-RTC6: Operating instructions Installation instructions Installation instructions Installation instructions Installation instructions

21(EN)Setting information list Setting information icon listIcon Description PageThe indoor unit is stopped or slight blow operation is in process. –The indoor unit is turned on after a problem such as a power failure isresolved. –The indoor unit is in defrosting operation. –Air flow direction is locked on some units. –Switching between Heat and Cool/Dry mode is prohibited (Switching toAuto mode is also prohibited.). –Remote control operation is restricted by a central control device. P.5The indoor unit filter needs to be cleaned. P.15Time to replace engine oil in the outdoor unit. Replace the oil. (Only whenthe gas heat pump air conditioner is used.) –Energy saving is on to control energy consumption. –The operation capacity of the outdoor unit is restricted. –The temperature sensor of the remote controller is detecting the roomtemperature. –“Operation lock” is set.• To unlock:Press and on the top screen. (Press and hold for 4 seconds ormore.)P.5Fresh air is used for ventilation.(Only when connecting a heat exchange ventilation unit or connecting acommercially sold fan)–Starts/stops automatically to maintain a set temperature range evenwhen off. P.16Internal cleaning is in process. P.5Internal drying is in process. P.5There are one or more units currently set to Direct airflow. –There are one or more units currently set to Indirect airflow. –There are one or more units currently set to Air circulation operation. –