Panasonic CZ-RTC6BLW Operating Instructions Manual

Also see for CZ-RTC6BLW: Operating instructions Installation instructions Installation instructions Operating instructions

26(EN)Setting information list Setting information icon listIcon Description PageThe indoor unit is stopped or slight blow operation is in process. –The indoor unit is turned on after a problem such as a power failure isresolved. –The indoor unit is in defrosting operation. –Air flow direction is locked on some units. * –Switching between Heat and Cool/Dry mode is prohibited (Switching toAuto mode is also prohibited.). –Remote control operation is restricted by a central control device. P.8The indoor unit filter needs to be cleaned. P.18Time to replace engine oil in the outdoor unit. Replace the oil. (Onlywhen the gas heat pump air conditioner is used.) –“ON/OFF timer” is set. * –Separate timers are set for each day. * –Energy saving is on to control energy consumption. * –The operation capacity of the outdoor unit is restricted. –Units are operated at the capacity set by schedule. * –If the set temp is changed, the temp will return to the registered settemp after a preset time. * –Upper and lower set temperature limits have been changed. * –Operation automatically stops in the set time zone at the set interval. * –“Repeat off timer” is set. * –Operation capacity of outdoor unit is controlled in the set time zone tolower noise. * –The temperature sensor of the remote controller is detecting the roomtemperature. –“Operation lock” is set.• To unlock:Press and on the top screen. (Press and hold for 4 secondsor more.)P.8Fresh air is used for ventilation. *(Only when connecting a heat exchange ventilation unit or connectinga commercially sold fan)–(Continued on next page)