Panasonic CZ-RWS3 Operating Instructions Manual

Also see for CZ-RWS3: Quick reference Installation instructions

22(EN)ECONAVI Setting(ECONAVI can be set using the separately sold ECONAVI panel or byconnecting the holder on the wall.)1. Press ECONAVI during operation.• You can toggle between ON andOFF each time you press ECONAVI .• “ ” is displayed whenthis setting is ON. *• The ECONAVI sensor detectshuman activity and conservesenergy based on the activitylevel.• Even when target temperature ischanged through the ECONAVIfunction, the set temperature shown in the remote controller does notchange.• When operating more than 1 indoor unit, the energy-saving effect maybe reduced depending on the room condition.• If the receiver emits 1 short beep followed by 1 long beep after pressingECONAVI , the indoor unit does not support this function. See page 30 forhow to enable or disable the button.• “ ” is displayed if the function is not available.* “ ” is not displayed in Fan mode.1